TPE materials can be used in the following industries: Tool handle: Like general handle lagging, it can be covered with TPE material. TPE material can be wrapped and bonded with plastic materials such as PP, PS, PC, ABS, etc. It is generally reflected in the handle of scissors, vise,...

One, the subject is different 1. Network camera: It is a new generation of camera that combines traditional camera and network technology. 2. Camera: It is a device that uses optical principles to record images. Second, the characteristics are different 1. Network camera: to transmit the image...

Performance The transmission performance of Category 6 network cable is higher than that of Category 5. The transmission bandwidth of Category 5 network cable is 100MHz, while Category 6 network cable can transmit Gigabit network speed in addition to 100MHz. In addition, the transmission...

The difference between copper wire and aluminum wire 1. The conductivity of copper is higher, and its conductivity is better than that of aluminum wire, but aluminum wire is cheaper, and its density is lower, and its weight is much smaller than that of copper wire. Therefore, you must choose...

In cable assembly manufacturing, one of the most important certifications is RoHS. While most people know it as manufacturing certification, many customers are unaware of the details and benefits of RoHS compliance. In order to give you a better understanding of cable assemblies, Xiaotian...

With the development of electronic technology, the application of cable accessories in the electronic communication industry is becoming more and more extensive, affecting all aspects of our work and life. Today, Xiaobian will learn with you what cable assemblies are, the application and...

Coaxial cable is a kind of electric wire and signal transmission line, which is generally made of four layers of materials: the innermost is a conductive copper wire, the outer surface of the wire is surrounded by a layer of plastic (used as an insulator and a dielectric), and the insulator is...

1. The appearance and color are different When we observe pure copper and brass, we will find that the color of brass is generally golden yellow and relatively shiny. Pure copper is also called red copper, so the color is generally purple-red, and it is also shiny, so we can also distinguish it...

Hangzhou Right Angle Cable Technology Co., Ltd. is committed to popularizing more industry knowledge for you

TPE and PVC are the two most commonly used materials in the rubber and plastics industry. Their properties are partly similar. Based on the advantages of environmental protection and non-toxicity, in the industries of toys, cables, daily necessities, etc., the dispute between TPE and PVC has...

Coaxial cable is divided into four layers from the inside to the outside: the central copper wire (single-strand solid wire or stranded wire), plastic insulator, mesh conductive layer and wire sheath. The central copper wire and the mesh-like conductive layer form a current loop. It is named...

14AWG means the wire diameter is 1.63mm and the cross-sectional area is 2.075mm². Commonly used are even wire gauges, such as 16AWG, 18AWG, and 20AWG wire gauges. Formula = 3.14*(single diameter/2)*(single diameter/2)*total number of roots. The final calculated result is 2.08 square millimeters....

All refer to the six types of network cables (twisted lines) in the TIA/EIA standard, and the standard channel bandwidth is 250 Mzhz. CAT6 refers to the six types of standards, which may be shielded or non -shielded; UTP (UNSHIELDED TWISTED PAIR) 6 refers to the right shielding six types of...

With the increase in distributed antenna systems (DAS) and the installation of small cells, low passive intermodulation distortion (PIM) interconnect assemblies have become increasingly popular. Modern complex multi-carrier communication systems such as DAS and small cells are now incredibly...

HM-330A Cable Fault Tester The growth of wireless and high-speed data applications has led to the use of coaxial cables over traditional video and telecom cables. With the development and standardization of coaxial cables for various applications, coaxial cables have become common equipment in...

With a wide variety of RF cables on the market with their own characteristics, choosing the right RF/microwave cable assembly is a very important task. Today, I will briefly introduce the advantages and disadvantages of RF cables. All coaxial cables contain a center conductor consisting of a...

Coaxial cable refers to a cable with two concentric conductors, and the conductor and the shield share the same axis. The most common coaxial cable consists of a copper wire conductor separated by an insulating material, on the outside of the inner layer of insulating material is another layer...

Fiber optic cables and coaxial cables are both types of guided media. fiber optic cable Optical fiber is a guiding medium made of plastic and glass that transmits signals in the form of light or optics. It provides high bandwidth. It's not as easy to install and implement as coax. coaxial...

There are obvious differences between simulated and network. Hangzhou right angle Cable Technology Co., Ltd. has sorted out the following information, hoping to help you. There is a difference between coaxial and analog in the recorded coding. The analog can't go to D1, and the coaxial can...

Coaxial cable can be used for analog signal and digital signal transmission. It is suitable for a variety of applications, among which the most important are television transmission, long-distance telephone transmission, short-distance connection between computer systems and LAN. As a means of...