UTP CAT6

Refers to Category 6 network cable (twisted pair) in TIA/EIA standard. The standard channel bandwidth is 250 MHz.
It may also be a Category 6 standard, either shielded or unshielded.
UTP（Unshielded Twisted Pair）6
Refers to unshielded Category 6 twisted pair, and UTP corresponds to FTP (shielded). The products are widely used in network communication systems, computers, switches, network testing, instruments, routers and other equipment.
Plug one end of the network wiring into the switch or router, and the other end into the computer.
Twisted pair is formed by twisting a pair of insulated metal wires. In this way, it can not only resist part of the electromagnetic wave interference from the outside, but also reduce the mutual interference between multiple twisted pairs.
Twist two insulated wires together, and the interference signal acts on the two twisted wires is consistent (this interference signal is called common-mode signal). The common-mode signal can be eliminated in the differential circuit of the received signal, so as to extract useful information (differential mode signal