About The Causes Of Wire And Cable Damage in Winter And Preventive Measures

actory transportation: When the product is loaded on the means of transport at the factory, warm and protective measures are required. For example, use closed means of transport to prevent direct exposure of products; Put a soft cushion on the product, such as bedding or other soft foam; Handle with care, do not load roughly, and avoid excessive bending of the product.

When arriving at the destination or construction site, it is best for the product supplier to send personnel to supervise and prevent rough work when unloading the product.

Storage: It is best to store the product indoors, and at the same time lay a layer of isolation on the surface of storage, such as wooden boards, bedding, foam, etc., to prevent the product from freezing and moisture, pay attention to prevent the product from directly contacting the ground to scratch the outer skin of the wire and cable, handle it gently.

When laying and installing the product: it is best to choose to work in the warm temperature in the middle and afternoon, if possible, you can use the heater fan and other equipment to "warm up" the product in advance before use, so that the product can achieve the best performance state. If it is buried, a protective layer such as cloth and foam can be laid in the cable trench beforehand. If it is a pipe thread, it is necessary to ensure that the inside and outside of the line pipe are smooth in advance so as not to scratch the wire. Iron pipes should pay special attention to the purchase of qualified quality iron pipes, there may be a large number of sharp convex points in the poor quality iron pipe pipes, which are very likely to scratch the outer skin of the wire.

By winter, wires and cables will become fragile and we need to "take care". Secondly, we must choose a regular brand of wire and cable manufacturers.