What is super six network cable

A new performance evaluation index has been determined for Category 6 cables. The single-core bare copper with a specification of 23AWG is used as the conductor, the polyethylene polymer material is used as the insulator, and the outer skin material is made of flame retardant polymer material, and the color is gray; the twisted pair conforms to international standards. Specification (ISO/IEC) requirements, electrical characteristics exceed the requirements of Category Six (Cat.6) international specifications, cable center cross isolation ensures NEXT performance and reasonable construction bending radius. LSZH: stands for "low smoke zero halogen". Low-smoke halogen-free materials can meet the requirements of safety and environmental protection.

The cross skeleton in the center of the cable rotates with the change of length, and the four pairs of twisted pairs are stuck in the groove of the skeleton to maintain the relative position of the four pairs of twisted pairs and improve the balance characteristics and crosstalk attenuation of the cable. In addition, it is ensured that the balanced structure of the cable is not damaged during installation. Category 6 unshielded twisted pair bare copper wire diameter is 0.57mm (wire gauge is 23AWG), insulated wire diameter is 1.02mm, and STP cable diameter is 6.53mm

Application: can be used for voice, integrated service data network (ISDN), ATM155Mbps and 622Mbps, 100MbpsTPDDI, Fast Ethernet and Gigabit Ethernet; longer transmission distance than Category 5 and Super Category 5, less transmission loss, wear-resistant, compression-resistant strong characteristics.